Standalone Drying Solutions: More Capacity Without a Complete Finishing Line
The next batch of cabinet doors is ready to spray. The last batch is still on the drying rack. Before long, the finishing department has plenty of work in progress and nowhere to put it. Even worse, freshly coated parts can get smudged or damaged while being moved to make room, or dust and woodworking debris can settle on the wet finish, creating costly rework.
For many shops, increasing output starts with what happens after spraying. Drying takes up space, ties up racks, and determines when parts can move to the next finishing step. Managing that process helps keep production moving while protecting the finish you’ve worked to achieve.

Superfici America is expanding its Standalone Drying Solutions lineup with two new products: the Nomad Mobile Drying Unit and MiniDry Single Rack Dryer. Joining DryVault and DryVault XL, these machines give shops more ways to overcome drying bottlenecks, including businesses that are not ready for a complete automated finishing line.
What Are Standalone Drying Solutions?
Standalone drying solutions add dedicated drying capacity to the finishing process you already use. Whether you hand spray in a small cabinet shop, operate a standalone spray machine, or manage a larger finishing department, they help address the time and space between coating application and the next production step.
The expanded lineup offers three approaches:
Nomad: Mobile infrared drying that brings the equipment to the work.
MiniDry: Controlled drying for a single rack of coated parts.
DryVault and DryVault XL: Larger batch drying environments for higher volumes and larger workpieces.

For smaller shops, this means an opportunity to expand capacity while continuing to use familiar spraying methods. For larger operations, it means additional drying capacity for the jobs or batches that need it.
When Drying Holds Up the Rest of the Shop
A drying bottleneck rarely stays confined to the drying area. Racks fill up, operators run out of room for freshly sprayed parts, and the next coat or sanding step has to wait.
Adding another person to the spray booth or increasing spraying speed may produce more wet parts without helping finished work leave the department any sooner.
Dedicated finishing drying equipment helps address that gap. By moving parts through drying sooner, shops can make better use of their spraying capacity, available racks, and floor space.
That is the purpose behind the expanded Standalone Drying Solutions lineup: helping businesses improve the finishing step that is limiting their output, without requiring them to change the entire operation.
Standard 120V Power and Propane Heat Make Setup Simple
For a small shop, bringing in new equipment can raise immediate questions. Will it need different electrical service? Does the building have a gas connection? How much work will it take to get running?
Nomad and MiniDry keep those requirements simple. Both operate using a standard 120V wall outlet and a standard 20 lb propane tank. There is no need to add a dedicated gas line or upgrade electrical service to operate the machines.
That combination helps avoid the expense and disruption of facility modifications while giving shops more flexibility in where they add drying capacity.
Both machines also ship directly to the customer fully assembled.

Connect the propane tank, plug into the wall outlet, and follow the operating instructions to begin using the equipment. No professional installation is required.
Nomad Brings Mobile Infrared Drying to the Work
Not every finishing job fits neatly into a fixed production flow. Some parts are difficult to move. Others are being finished away from the shop entirely.
The Nomad Mobile Drying Unit is a portable catalytic infrared dryer designed for that flexibility. Its four independently adjustable panels pivot to accommodate different part sizes and shapes, allowing operators to direct heat where it is needed.
From Cabinet Shops to Remodeling Projects
Consider a cabinet refinisher working on a kitchen remodel. Removable doors may go back to the shop, but other components need to be finished on site. Nomad gives remodelers and on-site painters a way to bring drying equipment to the project.
Inside a finishing shop, the same mobility can support a large workpiece, a repair, or a separate job that needs additional drying capacity. Instead of moving every part to one fixed drying location, operators can bring Nomad to the work.
Its standard wall power and propane tank make that portability practical, whether the next job is across the finishing department or at a customer’s location.

MiniDry Gives Each Rack a Controlled Drying Environment
For shops that regularly spray batches of cabinet doors or other components, the challenge is often what happens to the rack after application.
The MiniDry Single Rack Dryer provides a dedicated chamber for that next step. It combines catalytic infrared heat with controlled air circulation, while adjustable settings and saved recipes help operators repeat the drying process from rack to rack.
A hand spray shop can add MiniDry alongside its existing booth. A business using a standalone spray machine can add controlled drying without building a complete finishing line.
More Room to Work in a Small Shop
In a small shop, racks of wet parts can quickly take over valuable floor space. A growing order book can make that problem even more noticeable, with each new batch needing somewhere to sit.
MiniDry’s compact, single-rack design helps parts move through drying sooner, freeing up room for the next batch and keeping work moving through the finishing department. For a business trying to increase capacity

within its existing space, improving rack turnover can be an important part of the solution.
Useful Before the First Coat, Too
Finishing challenges do not always begin after spraying. In colder months, parts brought in from a cold storage area may need preheating, while paint or coatings may need warming before application.
These everyday situations extend the value of Standalone Drying Solutions beyond drying freshly coated parts. From preparing workpieces before spraying to warming coating materials during colder weather, the lineup gives shops more ways to support their finishing process as conditions change.
More Consistent Drying Through Cold Winters and Humid Summers
When freshly coated parts are left on open racks, the weather can become part of your drying schedule. Extreme cold can slow drying, while high humidity can leave parts taking longer than expected to dry. A process that worked well last week may keep racks occupied much longer this week.
For a shop trying to schedule sanding, recoating, or assembly, that uncertainty can affect the entire day’s work.
MiniDry and DryVault provide controlled drying environments that help take those changing conditions out of the equation, giving shops a more consistent process through cold winters and humid summers.
DryVault and DryVault XL Complete the Lineup
DryVault remains the larger batch option within the Standalone Drying Solutions family. Available as DryVault and DryVault XL, it uses an insulated room and circulating warm, filtered air to dry larger quantities of parts.
For high-volume finishing departments, DryVault provides dedicated drying space to keep larger batches moving through production. It is also an option for shops

finishing large or irregularly shaped products, such as entry doors, garage doors, or kitchen range hoods, that need more room than a single-rack dryer or cannot easily move through a flatline dryer.
Together, Nomad, MiniDry, and DryVault give businesses options for different workloads, from mobile drying on a remodeling project to larger batches in an established finishing department.
Frequently Asked Questions
Can I use a standalone dryer if I still spray by hand?
Yes. Standalone Drying Solutions are designed to complement manual finishing operations. You can keep your existing spray process while adding dedicated drying capacity to help reduce waiting time and keep parts moving.
Do Nomad and MiniDry need special electrical service or a gas line?
No. Both operate using a standard 120V wall outlet and a standard 20 lb propane tank, so you do not need a dedicated gas line or an electrical service upgrade to operate them.
Do Nomad and MiniDry arrive ready to use?
Yes. Both machines ship fully assembled and require no professional installation. Connect the propane tank, plug into a standard wall outlet, and follow the operating instructions to get started.
What is the difference between Nomad and MiniDry?
Nomad brings mobile, targeted infrared drying to the work, making it useful for changing projects, difficult-to-move parts, and on-site finishing. MiniDry provides a controlled chamber for drying a single rack of coated parts.
Can these dryers help when cold or humid weather slows drying?
MiniDry and DryVault provide controlled drying environments that help reduce the effect of changing shop conditions. This gives finishers more consistency than leaving coated parts on open racks exposed to those conditions.
Can I add standalone drying equipment to a larger finishing operation?
Yes. The lineup can also provide additional drying capacity within a larger operation, whether you need to support extra batches, handle special projects, or dry large workpieces outside the main production flow.
Find the Right Drying Solution for Your Shop
Your shop may need more drying capacity long before it needs a complete automated finishing line. It may need a mobile solution for on-site work, a compact dryer to keep racks turning, or a larger drying environment for demanding batches and oversized products.
Superfici America’s expanded Standalone Drying Solutions lineup gives you more ways to address those challenges while building on the finishing process you already have.
Speak with the Superfici America team about where drying is holding up your work. We can help you explore the lineup, request a quote, or discuss testing at our finishing center.





Comments