top of page

valtorta rs - reverse

Valtorta RS has a direct application head and a reverse for the application of base lacquer in high quantities. The head lifting movements and distance adjustment between dosing rollers and applicators take place on precision linear guides. The heads can be removed to facilitate the maintenance operations. The machine also allows adjustment of the misalignment of the upper heads respect to the against-rollers to optimize the result of application on the whole panel. The second head can be excluded to use the machine as a single roller application head.

Use : Application of UV base coats in high amounts.

application weight : from 5 to 80 gr/m2

The reverse roller head placed at the out-feed of the application head flattens the lacquer fi lm, achieving a smooth

application even at high application weights.

Screenshot 2019-11-27 17.34.49.png

Technical Data


Belt width                                                                1370 mm / 54 inches 

Roller width                                                             1500 mm / 59 inches

Working height                                                        900 mm / 35 inches

Panel thickness                                                       3 - 40 mm / .11 - 1.5 inches

Min. panel length                                                     300 mm / 11.8 inches

Application roller diameter                                    245 mm / 9.6 inches

Standard hardness of the application roller        50 Sh or grooved roller on request

Doctor roller diameter                                            175 mm / 6.8 inches

Feed speed                                                               7 - 20 m/min / 23 - 65 fpm

Compressed air consumption                                25 NI/min

Installed power                                                        5.5 kW


bottom of page